Maxon GPSLR Series, Руководство по эксплуатации

Страница: 9 / 33

9

Check the platform and fl ipover for cracks, holes, and bends on the
load-carrying surface and side plates. Also, make sure torsion bars,
coil springs, and fasteners are in place and undamaged.

Make sure platform and fl ipover load-carrying surfaces are clean (no
oil, debris, or corrosion).
Use the operation instructions in this manual to operate the Liftgate
through one cycle without a load on the platform. Raise the platform
to vehicle bed height. Next, lower the platform to ground level.

When the Liftgate is moving, listen for unusual noises and look for a
“jerking” motion or uneven movement on either side of the platform.
If service or repairs are not required (or if completed), stow the Lift-
gate.

With the platform un-
folded and raised to bed
level, check if the platform
is level
(YES illustra-
tion) . If the platform looks
like the YES illustration ,
you can operate Liftgate.
If the platform is below
level line and platform
looks like the
NO illustra-
tion , do not operate the
Liftgate. (See NOTE at
beginning of the DAILY
OPERATION CHECKS .)
YES
NO
LEVEL LINE
LEVEL LINE