Installation manual
Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436
25
Version 2021
Lifting arm stop at vehicle body
If you assembled the tail lift correctly, both lifting
arms will stop at the same time on the
rear vehicle frame.
If this should not be possible due to the assembly
configuration, it is essential that the lifting arm stops
only with the
head of the spring
against the rear
beam and that the
side plates
can be pushed
freely against the
lifting arm head
.
Eventually reinforce the rear beam in the area
where the lifting arms push against it, so that it is
not crushed when lifting with hydraulic pressure.
Always push the lifting arms against a plain surface. Fill any edge so that the heads always
push against a plain and firm surface. The body could be lifted and the spring of the lifting arm
not work properly.
side plate
side plate
spring
lifting arm head
