Maxon EM-4800 Скачать руководство пользователя страница 39

Страница: 39 / 50

GE-MARC OPERATION

SCAN OPERATION, Continued
Group Scan, Continued

scanned. Groups are added to the scan list on a per-system
basis through PC programming. Each system's group scan
list is retained in memory when the radio is turned off.

Enable/Disable Group Scan

To enable group scan, press the

SCN

button. The SCAN icon

will appear. To disable group scan, press and release the

SCN

button - the SCAN icon will disappear.

Add/Delete Groups

Groups can be added or deleted from the scan list as desired.

NOTE:

Scan must be disabled to add or delete a Group on

the scan list.

To add groups:

Select the desired group to be added. Press the

SYS

button, then press

SCN

. The icon will appear and the

group will be added to the scan list. If the current group is
already included in the scan list, the icon will display.

To delete groups:

Select the desired group to be deleted. Press

the

SYS

button and then press the

SCN

button. The icon

will turn off and the group will be removed from the scan list.

DIRECT MODE

The direct (or talk around) mode provides short range, line-
of-sight communications - this mode is not functional in a
trunked system.

Содержание EM-4800



















































Результаты поиска

Содержание EM-4800

Отзывы:

Бренды по названию

Популярные бренды

Maxon EM-4800, Руководство по эксплуатации

Результаты поиска

Содержание EM-4800

Отзывы:

Бренды по названию

Популярные бренды