manualshive.com logo in svg

Maxon EM-4800, Руководство по эксплуатации

Поделиться
Скачать
Maxon EM-4800 Скачать руководство пользователя страница 17

TURNING ON THE RADIO

Rotate the power on/off-volume control clockwise, out of
detent, to turn on the radio. A short beep (if enabled through
programming) indicates the radio is ready for operation. The
display will show the last selected system and group.
If communication with the system's control channel cannot be
established in the EDACS trunked environment, the NC (out of
range) message will be displayed. You may find it necessary to
move to another location or select another trunking system to
re-establish the control channel link for trunked mode opera-
tions.
The radio will automatically transmit a "log-in" message when
turned on or whenever the radio roams into a new system
when changing the group selection. This "log-in" message
includes the logical ID and the group ID for that radio.

RECEIVING A CALL

Turn on the radio as directed above. Adjust the power on/off-
volume control clockwise to the desired audio level. Select the
desired system by pressing the 

SYS

 button and then using the

!"

or 

#

 button to scroll to the desired system. Only systems

programmed can be selected.
Select the desired group by pressing the 

!"

or 

#

 button. Only

groups programmed can be selected. The radio is now ready
to receive calls.

NOTE: 

To move quickly through system or group selections,

press and hold the 

!

 or 

#

 button.

13

Содержание EM-4800



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды