Maxon BIKEDRIVE MX25, Руководство пользователя

Страница: 11 / 44

Operation
After the Ride
maxon BIKE DRIVE | User Manual | rel8583
11
1.8 After the Ride
If you take a
break:
Always turn the BIKE DRIVE completely off whenever you are not sitting on the
bike.
1) Turn the PowerGrip in neutral position «Zero».
2) Turn the BIKE DRIVE off.
After the fun
is before the
fun!
Perform the following steps for your BIKE DRIVE to deliver riding pleasure for
many years:
1) Turn the PowerGrip in neutral position «Zero».
2) Turn the BIKE DRIVE off.
3) Clean the bike (

page 13).
4) Remove the battery.
5) Remove moisture from motor, PowerGrip, battery, battery rail, and
cables, if any.
6) Charge the battery (

page 13)
7) Observe the instructions on battery storage (

page 15).
Prepare for
transport:
1) Remove the battery and cover the battery rail to protect it from dirt
and humidity.
2) Protect the bike from dirt, dust, rain, snow, salt water, spray water. If
necessary, use transport bag or cover with tarpaulin.
3) Observe the bike manufacturer’s instructions if you intend to remove
the front and/or rear wheel for transport.
4) Observe the following remark on air transportation if you intend to
take your bike along on a flight.
Transport by Air
According to the International Air Transport Association (IATA), lithium batteries with
a capacity exceeding 100 Wh are considered as hazardous goods subject to appro-
priate conditions for air transport. Carriage on board passenger aircraft is not per-
mitted.
Note that all BIKEDRIVE batteries have a capacity of more than 100 Wh.
Check with your airline or your travel agent on means of transportation before
scheduling a flight.