7
3. Installation of ACC-513/ACC-514
To install ACC-513/ACC-514 into the SD-160, this section explains step-by-step of
how to disassemble the radio, install the ACC-513/ACC-514 and reassemble the radio.
Important
Before disassembling and reassembling the radio, wear a conduction wrist strap to
prevent any components on its main board from being damaged by electrostatic
discharge.
Opening the Upper Cover :
1. Unfasten the four mounting screws
located on the bottom cover of the
radio.
Figure 3.1. Loosing the four mounting screws
2. Open slowly the upper cover from the side of
power connector.
Caution :
Do not open the upper cover from
the side of DB-15 connector
Figure 3.2. Opening the upper cover
