22
f. Tx Delay Time 2
This is the required time to detect tone, and is only available for the FFSK Modem
and channel with Tone (CTCSS/DCS). In case of SD160 series, 250ms (Default) is
recommended.
g. Number of Allowable Errors for Start Bit
This option prevents the radio from receiving invalid data by an external
disturbance. Consequently, the more unwanted signal the radio receives, the less
selectable value you may select.
6.4. System Option 3
a. Tx Off Delay
If all assigned data is transmitted, after the transmission the Radio keeps the TX
status during this period of time, TX stops. Normally, in case of the SD160 series,
0ms (Default) is recommended. Detailed information is given in Section 5.2.
b. Tx On Delay
Radio transmits data after elapsing this period of time since TX starts. In case of
the SD160 series, 20ms (Default) is recommended. Detailed information is given in
Section 5.2.
c. Rx On Delay
The radio enters RX status after elapsing this period of time since receiving the
carrier. In case of the SD160 series, 16ms (Default) is recommended. Detailed
information is given in Section 5.2.
