front of the unit, move
the thumbwheel clockwise
for a high setting, or counter-clockwise to a low
setting. A low setting requires you to speak more
loudly to activate the transmitter and should be
used when background noise levels are high. A
higher setting allows you to speak in a softer
voice and should be used when lower background
noise is present.
NOTE:
Very high noise levels may cause the unit
to transmit continuously in the VOX mode. When
very high background noise levels are present, the
P-T-T mode may be the only method to avoid this
problem.
The Maxon 49-HX will not receive a transmission
while you are transmitting. Wait until an incoming
message is completed before transmitting.
If the unit appears to malfunction, or has constant
static present, try replacing the batteries, even if
the “BATT LOW” LED has not illuminated.
USING THE INTERCOM MODE
1)
When using the unit’s intercom, follow steps
1 ~ 3 in the operating instructions.
10