The MNAC-110 Power Supply receptacle fuse rating is 2.50 Amps 250 Volts slo blo.
The MNAC-220 Power Supply receptacle fuse rating is 1.25 Amps 250 Volts slo blo.
CAUTION: For continued protection against the risk of fire, replace only with the same type and rating of fuse.
Power Supply Removal:
Power (AC or DC) should be disconnected from the module before removing for replacement or
service. This is accomplished by removing the AC IEC plug for the MNAC unit and wires from the terminal block of the MNDC
unit. To remove a power supply module from the chassis, unscrew the two thumb screws on the front panel and pull back on
the module handle until the unit is clear of the chassis guide slot.
CHAPTER 4: SERVICE & SUPPORT
4-2
MAXNET
®
– MNAC/MNDC Modular Power Supply – Installation & Operation Manual
