Installing the fixture
WARNING:
•
Avoid coiled cords. Coiled cords may lead to electromagnetic interference.
•
Input power cord MUST be secured and routed away from the luminaire enclosure and
reflector, via the mounting cable nearest the ballast at least every 4 inches.
•
Always install the lamp before connecting the fixture to the mains. Never use the fixture
without a lamp or reflector!
•
Ensure the local cabling can support the voltage and current requirements of the fixture.
1.
Install the lamp in the fixture.
2.
Connect to the mains. (Make sure the plug used is compatible with your socket.)
Hang light with optional rope..
Inspection, maintenance and repair
WARNING:
•
Disconnect the product from mains before performing any maintenance or repairs.
• Do not open or disassemble the fixture, it contains no serviceable parts inside. Opening the fixture can be dangerous
and will void the warranty.
• Always allow for a cool down period of at least 30 minutes before touching the lamp or reflector.
CAUTION:
•
Do not clean the fixture with detergents, abrasives or other aggressive substances.
•
Do not touch the inside of the reflector and do not use water, abrasives or detergents to clean it. This will damage the
reflective surface.
•
Wait 20 minutes before activating the fixture after maintenance work has been conducted.
•
Regularly check the fixture for dust or dirt buildup. Clean if necessary.
•
Contamination may cause overheating and decreased performance.
- Clean the inside of the reflector only with a soft dry cloth.
- Clean the electric ballast and outside of the fixture using a dry or damp cloth.
•
Check the lamp monthly for discolorations or black markings. Always replace a damaged lamp.
•
Regularly check the wiring of the product to ensure it’s undamaged.
Placement and replacement of the lamp
CAUTION:
•
Do not touch lamp with bare hands as this will damage the lamp. Always use a fabric glove to handle the lamp.
NOTE:
The lamp must be replaced every year or after 5000 lighting hours, whichever one comes first.
•
Hold the lamp with a fabric glove to prevent it from falling. Use a protective glove if the lamp is damaged.
Storage and disposal
•
Store the fixture in a dry, clean environment.
•
The product must not be discarded as unsorted municipal waste, but must be collected separately for the purpose of treatment,
recovery and environmentally sound disposal.
CAUTION:
The lamps are chemical hazardous waste and must be delivered to the designated authorities.
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 3
REV: 05/04/18
Operating Instructions
PhotonMax Series
MaxLite
MaxLite PhotonMax 315 Ceramic Metal Halide Single Lamp Fixture
®
