General Wiring Diagram
CAUTION:
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Installation
Surface Mount:
1.
Unfasten surface mount plate side screw.
(Fig. 1)
2.
Slide surface mount plate out and up to remove.
(Fig. 2)
3.
Mount surface mount plate onto J Box.
(Fig. 3)
4.
Secure fixture onto surface mount plate by first
hooking fixture onto ring.
(Fig. 4)
5.
Wire fixture (according to diagram above.)
6.
Lift fixture and fasten with surface mount plate
screw.
(Fig. 5)
(+) LINE
(-) COMMON
GROUND
GREEN
WHITE
BLACK
Light
Fixture
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: [email protected]
Page: 2
REV: 12/13/21
Operating Instructions
CPL Series
MaxLite LED Low-Profile Garage & Canopy Luminaire
®
