QIG |
PSAT-6-4P-250
www.maxlink.cz
EN: Quick Installation Guide for PSAT-6-4P-250
1)
Connection procedure:
a.
Plug the supplied AC adapter (52V, 1.25A) into the power connector of the switch
and then to the 230V outlet.
b.
Connect devices (cameras, VOIP phone, WiFis ...) supporting 802.3af/at PoE with
max. 30W/port to the 1
–
4 ports. Total consumption of the connected
devices cannot exceed more then 65W. You can connect also non-PoE devices to
ports 1-4.
c.
Ports 5 and 6 are intended for a data transmission only, you can connect for
example: switch, router, NVR, desktop PC, printers, etc.
2)
Manual mode switch:
a.
Normal "N": The switch supplies the device at a distance of no more than 100m. The
port-to-port throughput is 10/100Mbps.
b.
VLAN: Ports are logically separated from one another, preventing unwanted
broadcast storms in this mode. The switch supplies power to the device up to 100m
and the portability to the port is 10/100Mbps.
c.
250m: Long Range Mode. Switch powering devices up to 250m with a reduced
10Mbps throughput per port.
3)
Package contains:
a.
Device
b.
Power adapter 52V / 1.25A
c.
Power cord
