Maxital IRLINK, Инструкция по эксплуатации, Страница: 25 / 53

25
How To Use The IR Extender Accessory
The IR extender accessory was connected to the receiver
through its own special Connector plug. The extender accessory
emits an IR signal, bathing you're A/V equipment with the
remote signal. To use the IR extender accessory, follow the
instructions below:
1.
Plug the IR extender into the transmitter in rear panel.
2. Orient the end of the IR extender so that it points in the
general direction of the IR sensors of the source A/V
equipment you wish to be controlled. Cut a length of provided
fastener strip to secure the IR extender, which is always in it’s
position.
3. Position the receiver so that your remote control signal can
strike the IR window on the bottom front of the unit. To use
your remote control, point it at the front of the receiver.