Maxital IRLINK, Инструкция по эксплуатации, Страница: 22 / 53

22
B. the Using Attention
1. The outlet of the power supply must have the same voltage
as the local area.
2. Be sure the transmitter and the receiver were connected to
power supply (the LED has been lighted up already).
3. In some situation, there are two or more equipment is
used within 150 feet at the same time, perhaps the
equipment may not work well.
4. Please do not use another one which operation
frequency is similar to when the equipment is working .
5. To make the remote control face to the transmitter’s IR
Remote control window, and the receiver’s IR remote
control window (or extender accessory) to the source
equipment, the IR remote distance should be in the
Specifications range.
The LED of the receiver and the transmitter’s IR remote
control window would flash if receiving the remote control
signal when there is not harmful interference in the
ambient.
Caution: If the receiver’s indication LED flash when the
transmitter is not operating. It indicates there is interference
in the ambient. Then perhaps, you can’t control the system
so well.