4
Step 2 (Fig. 6)
Move spring
clips to the 5” holes. Tighten the screws.
Step 3 (Fig. 1)
Screw adapter (B) into socket in recessed housing.
Step 4 (Fig. 2)
Plug base cable connector into lamp (A).
Step 5 (Fig. 3)
Compress spring clips (D) and insert
into ears on inside of recessed housing.
Step 6 (Fig. 4)
Carefully route wires into fixture. Push retrofit into recessed housing
until the trim is flush with the ceiling surface.
For 5" / 6" housings without ears
Step 1 (Fig. 7)
Remove existing trim and CFL or incandescent bulbs. Unscrew the
two spring clips (D) and remove them.
Step 2 (Fig. 8)
Install two friction clips (C) onto the fixture. For 5
"
housing,
tighten the screws into the (5) holes with Phillips screwdriver. For
6
"
housing, tighten the screws into the (6) holes with Phillips
screwdriver.
Step 3 (Fig. 1)
Screw adapter (B) into socket in recessed housing.
Step 4 (Fig. 2)
Plug base cable connector into lamp (A).
Step 5 (Fig. 9)
Carefully route wires into fixture. Push retrofit into recessed housing
until the trim is flush with the ceiling surface.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
5” POSITION
6"
5"
D
D
C
