Maximum S-2000 FTA PVR, Руководство пользователя

Страница: 55 / 134

ENGLISH
Single Satellite Scan: Press Blue to enter the channel search menu.
Scan Mode: Press Left/Right to select between default or Network. Network
scan will searched by NIT table.
Default scan will search for channels from
pre-programmed transponder list.
Crypted: Press Left/Right to select ‘All Channels’ or ‘FTA Channels’. All
channels will search for free to air and crypted channels. FTA channels will
only search for free to air channels.
Service Type: Press Left/Right to select ‘ALL’, ‘DTV’ or ‘Radio’. All will
search for both radio and tv channels, DTV will search for only tv channels
and Radio will search for only radio channels.
Press OK to start scanning with the above settings.
Multi-Satellites Scan: Press OK to select satellites with the mark"
9
“, then press
blue to enter the scanning setting menu. – This menu contains the same settings
as the single satellite scan menu
(see previous paragraph).
Press OK to start the multi-satellites scan.
Transponder scan: Press GOTO to see the list of the transponders of the
selected satellite. If you press GOTO you will go back to the satellite list.
Add transponder: Press Red to add a new transponder. You cannot add a
transponder with the same frequency as the transponders which already are in the
list.
20