7
6
model no. 058-9373-2 | contact us 1-888-670-6682
NOTE:
Carefully read and understand all the instructions in
this manual before using the Gravity-feed Spray Gun. Ensure
that the operator of the tool has read and understood these
instructions.
•
Do not use oxygen or any other combustible or bottled gas to
power air-powered tools. Failure to observe this warning
can cause explosion and serious personal injury or
death. Use only compressed air to power
air-powered tools. Use a minimum of 25' (7.6 m) of
hose to connect the tool to the compressor. Failure
to comply will result in serious injury or loss of life.
•
Risk of bursting.
Make sure the regulator is adjusted
so that the compressor outlet pressure is set lower
than the maximum operating pressure of the tool.
Before starting the compressor, pull the ring on the
safety valve to make sure the valve moves freely.
Drain water from tank after each use. Do not weld
or repair tank. Relieve all pressure in the hose
before removing or attaching accessories.
• Do not use this tool in the presence of flammable
liquids or gases. Sparks that are created during use
may ignite gases. Please use the tool in a well-
ventilated area only and avoid any ignition sources
such as smoking and open flames.
Risk of personal injury.
Do not direct compressed air from the
air hose towards the user or other persons.
Risk for breathing.
Never directly inhale the air produced by
the compressor. Use the spray gun in a well-ventilated area.
Risk of bursting.
Do not adjust the pressure switch or safety
valve for any reason. They have been preset at the factory for
this compressor’s maximum pressure. Tampering with the
pressure switch or the safety valve may cause personal injury
or property damage.
Risk of burns.
The pump and the manifold generate high
temperatures. In order to avoid burns or other injuries, do not
touch the pump, the manifold, or the transfer tube while the
compressor is running. Allow the parts to cool down before
handling or servicing. Keep children away from the
compressor at all times.
Risk of electric shock.
Do not expose a compressor to rain.
Store it indoors. Disconnect the compressor from the power
source before servicing. Compressor must be grounded. Do
not use grounding adaptors.
WARNING!
Potential hazard that could result in serious injury or
loss of life.
• Do not allow unskilled or untrained individuals to operate
the Gravity-feed Spray Gun.
• Use components recommended by manufacturers: Never
modify the tool for other applications. Use only parts,
nozzles, and accessories with specifications as mentioned
in this manual (see section “ Technical Specifications”).
• Inspect the tool components and attachments before
operation and ensure that they are assembled properly and
are not damaged. Failure to comply could lead to serious
injury or loss of life.
• Locate the compressor in a well-ventilated area for cooling,
at a minimum of 12" (31 cm) away from the nearest wall.
• Protect the air hose and the power cord from damage and
puncture. Inspect them for weak or worn spots every week,
and replace them if necessary.
DANGER!
Potential hazard that will result in serious injury or
loss of life.
• Keep children away from the work area. Do not allow
children to handle power tools.
• Do not point the tool towards yourself or other people,
even when the tool has stopped. Keep hands, feet,
and all other parts of the body clear from work area.
• Never use homogenate hydrocarbon solvent, which
can chemically react with aluminum and zinc parts
and which is not chemically compatible with aluminum
and zinc parts.
TM
