NOTE:
Icons are colour-coded. Please refer to the actual
tool for the specific colour.
WARNING!
Potential hazard that could result in serious injury
or loss of life.
• The use of any other types of nails will cause the nailer to
jam and could lead to serious injury.
This icon is used to select the proper nails for this specific nailer.
NAIL TYPE ICONS
15
14
model no. 058-9345-0 | contact us 1-888-670-6682
This lightweight MAXIMUM
®
Air-powered Clipped-head Framing Nailer
drives 2 to 3 1/4" (50 to 83 mm) long clipped-head framing nails.
Acceptable Nails
Length: 2 to 3 1/4" (50 to 83 mm)
Angle: 34°
This nailer can be used with a variety of shank types (e.g. ring, smooth,
spiral) and a variety of coatings or nail compositions (e.g. electro, me-
chanical, hot-dipped galvanized or stainless steel, etc.).
2. Take hold of the nailer firmly with one
hand and use the other hand to press
the sliding pusher (1) on the magazine
and slide it back (Fig. D).
1. Disconnect the tool (1) from the air
supply (2) (Fig. C).
Operation
Loading Nails
DANGER!
Potential hazard that will result in serious injury
or loss of life.
•
Disconnect the tool from the compressed air source
before loading nails.
Do not point the tool towards the operator or other
people while changing nails.
Do not hold the tool with the trigger pressed while
changing the nails.
Failure to comply will lead to serious injury or loss of life.
•
•
•
3 1/4”
（
83 mm
）
2” (50 mm)
34°
1
2
Fig. C
1
Fig. D
Fig. A
Fig. B
TM
