9
8
model no.
058-9342-6
| contact us 1-888-670-6682
CAUTION!
Potential hazard that may result in moderate injury
or damage to equipment.
NOTE:
Recycle unwanted materials rather than disposing of
them as waste. Sort the tools, hoses, and package into specific
categories and take them to the local recycling centre or
dispose of them in an environmentally safe way.
CAUTION!
Potential hazard that may result in moderate injury or
damage to equipment.
Disconnect the tool from the air supply and turn off
the compressor
before performing any maintenance,
or changing accessories, when the tool is not in use,
when it is being handed to another person, and
when it is left unattended. Failure to comply may
result in injury or damage to equipment.
Use safety goggles and ear protection:
Wear safety glasses with side shields when
operating the tool/compressor and verify that
others in the work area are also wearing safety
glasses. Safety glasses must provide protection
from flying particles from the front and the sides.
Air-powered tools are loud and the sound can cause
hearing damage. Always wear ear protection to
prevent hearing damage and loss. Failure to comply
may result in injury.
Do not use while under the influence of alcohol,drugs
or medication.
• Always ensure that the tool has stopped before connecting to the
air supply.
• Do not wear watches, rings, bracelets, or loose hair or clothing
when
using any air tool.
• Do not overload the tool.
Allow the tool to operate at its optimum
speed for maximum efficiency.
• Do not use a tool that is leaking air, with missing or damaged parts,
or that requires repairs.
Verify that all screws are securely tightened.
• For optimal safety and tool performance,
inspect the tool before every
usage
in order to ensure free movement of the trigger, safety mechanisms,
and springs.
• Always keep your air tool clean and lubricated.
Daily lubrication is
essential to avoid internal corrosion and possible failures.
• Ensure the floor is not slippery
and wear non-slip shoes. Floors should
be kept clean and clear.
• Always follow all workshop safety rules, regulations, and conditions
when
using the Air-powered 2-in-1 Flooring Nailer.
• Carry the tool by the handle only.
Do not carry the tool with a finger on
the trigger. Do not carry the tool by the hose, magazine or any other parts.
• Do not store the tool in a freezing environment
to prevent ice formation
on the operating valves of the tool, as doing so may cause tool failure.
• Handling and storage of oil:
Use with adequate ventilation. Avoid contact
of oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store
in a tightly closed container in a cool, dry, well-ventilated area free from
incompatible substances.
TM
