model no. 054-1359-4 | contact us 1-888-670-6682
12
INSTALLING THE AUXILIARY HANDLE (Fig.
A)
For your personal safety we recommend using the
auxiliary handle at all times.
To fit the handle, loosen the bottom of the handle
counter-clockwise and slide the clamping loop over
the handle collar. Rotate the handle around the handle
collar until the handle is in the desired position.
Tighten fully. If you are right handed fit the handle as
shown in Fig A. If you are left handed fit the handle in
the opposite position.
MOUNTING BIT IN CHUCK (Fig. B)
When mounting the drill bit, insert bit between the
chuck jaws as far as it will go. Ensure drill bit is in
the centre of the chuck jaws. Using the chuck key
provided, there are three holes in which the chuck key
should be inserted. Tighten at all three holes, not just
one. Your drill bit is now locked in the chuck. The bit
can be removed by reversing the above procedure.
OPER
A
TING INS
TRUCTIONS
NOTE:
Before using the tool, read the instruction book carefully.
Fig. A
Fig. B
Fig. C
Fig. D
4
3
