Maximum 054-0403-4, Инструкция по эксплуатации

Страница: 15 / 22

15
TM
OPER
A
TING INS
TRUCTIO
NS
3. NOZZLE SELECTION
The kit is supplied with 4 different nozzles which can
be used as follows:
1) Concentration nozzle
This nozzle directs a concentrated heat flow to the
workpiece. It is ideal when removing paint in awkward
corners, crevices, mouldings, beading, architraves or
whenever precise paint removal is required.
2) Flat Nozzle
This nozzle directs a long narrow heat pattern to the
workpiece and is ideal for removing paint or varnish
from large flat surfaces such as skirting boards, doors,
stairs etc. It should be used in conjunction with a flat
scraper. Vinyl tiles can be removed by softening the
tile and adhesive.
3) Glass Protection Nozzle
This nozzle deflects the heat away from glass or other
fragile areas and back onto the workpiece.
4) Hook Nozzle
This nozzle disperses the heat flow evenly around
the whole workpiece. It is ideal for defrosting frozen
pipes, soldering pipe work, bending plastics and heat-
shrinking electrical parts.
4. SHAVE HOOK
Take the handle from the set, remove the nut from
the end, and fit the triangle blade in place by refitting
and tightening the nut. The triangular shave hook is
ideal for stripping paint from flat wooden surface and
edges.
Remember to clean the blade after use with wire
wool, and lightly oil before storing.