Basic Information
2
Revision 11.2011
Air Amplifiers
1.2
Intended Use
Air amplifiers are used exclusively in compressed air networks to compress pre-
amplified air to a desired final pressure.
The drive of the air amplifiers is designed for primary pressure of up to 10 bars.
Air amplifier changes and conversions are not permitted, for reasons of safety. All
maintenance, assembly and operating information prescribed in these assembly
instructions must be complied with to ensure full functionality and safety. If you are
using other gases, you must consult MAXIMATOR GmbH.
1.3
Warranty and Liability
In principle, the "General Conditions of Sale and Delivery" supplied by the
manufacturer of the air amplifiers shall apply.
Warranty and liability claims in case of personal or property damage shall be
precluded if they are due to one or more of the following causes:
Abnormal use of the air amplifiers.
Incorrect putting into service, operation or maintenance of the air amplifiers.
Changes to the air amplifiers.
Operating the air amplifiers with defective safety devices or incorrectly
installed safety and protective devices.
Failure to comply with the information in these assembly instructions in
respect of putting into service, operation and maintenance.
Inadequate surveillance of parts that are subject to abrasion.
Incorrect repair work.
