8
FIG. a
FIG. b
Abb. d
REPLACING THE AIR FILTER
FIG. c
FIG. C
- 1 Fastening nut
- 2 Support base
- 3 Filter locking flange
- 4 Protective filter
- 5 Gasket
- 6 Filter
- 7 Outer shell
1. Switch off the air purifier and disconnect the power
cable, then turn it upside down, placing it on a flat
and stable surface (fig.a).
2. Disconnect the connector and unscrew the nut under
the support base counter-clockwise. (fig.b).
3. Remove the base from the central bar. Do the same
for the filter locking flange, protective filter and
gasket (fig.c).
4. Remove the old air filter and dispose of it accordingly.
5. Refit the new air filter by rotating it and paying
attention that the positioning pin fits inside the hole
above the filter (fig.d).
6. Clean any dust residues inside the housing with a
cloth.
CAUTION: IF YOU DON’T FIT THE FILTER PROPERLY,
THE SUPPORT BASE WON’T LOCK AND THE DEVICE
WON’T WORK.
7. Refit the gasket, filter locking flange, protective filter,
support base and screw the nut. Connect the power
supply connector and turn the air purifier, placing the
base on a flat and stable surface.
NOTE: DO NOT TOUCH THE FILTER
INTERIOR AND DO NOT CLEAN IT: IT WILL
LOSE ITS FILTERING POWER.
1
2
3
4
5
6
7
