Maxima 2 Levels, Руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 52

18
THE INSTRUCTIONS LISTED BELOW MUST BE CAREFULLY READ SO THAT USERS ACT AP-
PROPRIATELY ON A DAILY BASIS WHEN OPERATING THE MACHINE AND CARRYING OUT
MAINTENANCE. THIS PREVENTS ANY KIND OF ACCIDENT LINKED TO SITUATIONS INVOLVING
POTENTIAL RISK FOR PEOPLE AND/OR OBJECTS.
2.6 Items supplied with the machine
The machine is supplied together with the following items:
1. Operating and maintenance manual.
2. Kit of gaskets and packet of food-safe lubricating grease.
3. Tube brush for cleaning.
4. Paddle for stirring the liquid cream in order to make it smooth and even.
3 GENERAL SAFETY REGULATIONS
3.1 General instructions
For the safety of machine users, the following safety instructions must be complied with:
1. Do not attempt to start the machine until you have acquired a suitable understanding of how it operates, by reading
this manual.
2. In case of doubts, even after carefully reading this manual, contact the technical assistance service.
3. Make sure that all personnel involved in using the machine are aware of the safety instructions.
4. Before starting the machine, the operator must check for any faults and/or defects visible on the safety de-
vices and on the machine. If any faults are found, immediately report them to the manufacturer or to the nearest
authorised service centre.
5. The machine must only be used for the purposes for which it was intended and in accordance with the
manufacturer’s
instructions.
6. Every day, check that all safety devices on the machine are operating correctly (see sections 3.2 and 8.5 of this man-
ual).
7. Safety devices must not be removed or bypassed for any reason.
8. Any tampering with or modification of the machine not authorised in advance by the manufacturer shall release the
manufacturer from any responsibility for injury/damage to people and/or objects.
9. The identification plate and safety symbols/stickers applied to the machine must be kept in perfect condition. If they
are damaged, they must be promptly substituted.
10. Work on electrical connections must only be carried out by qualified technical personnel.
11. The operator must be familiar with the machine controls as described in section 5.1
“Controls”.
12. The operator must not carry out any operations which are not described in this manual.
13. Only purchase and use original spare parts, which are guaranteed by the manufacturer. Contact the dealer or the
nearest service centre to replace faulty or damaged components.
14. Do not wear clothing, jewellery and accessories which may become tangled in machine moving parts.
15. Keep the area around the machine clear and free of obstructions.
16. Do not put fingers and/or objects in the machine slots or holes.
17. Do not use the machine with damp or wet hands.
18. Always wear suitable gloves and a hair cover for hygiene.