Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Operation
•
Activate the appliance using the
“
ON/OFF
”
switch located at the front. If you want to use the timer, simply
select the desired time. The machine will then start and stop automatically (the timer function only works if
the general “ON/OFF” switch is
deactivated).
•
Select the desired temperature using the thermostat. The 1x40 model is fitted with two thermostats (top
and bottom). The 2x40 model is fitted with three thermostats (top, middle and bottom).
•
When the selected temperature has been reached the indicator will illuminate. Open the door, place your
product in the middle of the chamber and close the door. Remove product when it is cooked as desired.
•
When not in use, switch off the machine.
•
Clean the appliance after use
(see chapter “
Cleaning and Maintenance
”)
.
•
If the appliance will not be used for a longer period, please remove the plug from the main socket
Troubleshooting
The follow overview will help you understand possible problems. However, only qualified
technicians should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The appliance does not work.
▪
The appliance is switched off.
▪
The power supply is
interupted.
▪
The voltage is not correct.
➢
Activate the appliance.
➢
Check the power supply, plug
in power cable.
➢
Use a compatible power
source.
The appliance is switched on
(indicator is illuminated) but does
not get warm.
▪
Defective thermostat.
▪
Defective heating element.
➢
Replace part.
➢
Replace part.
The appliance is switched on but
the indicator is not illuminated.
▪
Defective indicator light.
➢
Replace part.
The temperature cannot be set /
adjusted.
▪
Defective thermostat.
➢
Replace part.
