Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Installation
1.
The machine must be positioned on a flat and stable surface.
2.
Choose a surface where the machine is not exposed to direct sunlight, or close to a direct source of heat
such as a cooker, oven or radiator.
3.
When positioning the appliance, maintain a distance of 10cm (4 inches) between the appliance and walls or
other objects for ventilation and ease of use.
4.
Level the appliance and position the machine in such a way that the plug is accessible at all times. The
appliance may operate less effectively if not level.
5.
Plug the power plug into the main socket.
Operation
•
Switch on the appliance using the “ON/OFF” switch located at the front (indicator
illuminated).
•
Lubricate the grill surface using cooking oil. Do not use the appliance without cooking oil.
•
Select the desired temperature using the temperature control dial located at the front. The indicator light
will stay illuminated during the heating process. When the selected temperature has been reached the
indicator will go dark.
•
Place your product on the grill and cook as desired.
•
When not in use, set temperature to minimum, switch off and unplug the appliance
•
It is recommended to clean the appliance on a daily basis.
(see chapter “
Cleaning and Maintenance
”)
.
Troubleshooting
The follow overview will help you understand the control panel and possible problems. However, only qualified
engineers should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The appliance does not work.
▪
The appliance is switched off.
▪
The power supply is
interupted.
▪
The voltage is not correct.
▪
Unknown defect
➢
Switch on the appliance.
➢
Check the power supply, plug
in power cable.
➢
Use compatible power source.
➢
Press the “RESET” button
located at the back of the
machine. Contact supplier if
this does not solve the issue.
The appliance is on but does not
get warm (indicator illuminated).
▪
Temperature set to minimum.
▪
Temperature controller is
broken.
▪
Heating element is broken.
➢
Adjust temperature setting.
➢
Replace part.
➢
Replace part.
Temperature cannot be adjusted.
▪
Temperature controller is
broken.
➢
Replace part.
The appliance is working but the
indicator is not illuminated.
▪
Indicator is broken
➢
Replace part.
