Maxim MRT190H, Руководство пользователя

Страница: 14 / 42

MRT190H
800-621-2789 RT190H Rev B.1 Page 14
SERVICE
•
Always stop the engine whenever you leave the equipment, before cleaning, repairing or
inspecting the unit. Engine should be turned off and cool. Never make adjustments or
repairs with the engine (motor) running. Disconnect the spark plug wire and keep the
wire away from the plug. Rotate the ON/OFF switch located on the engine to the OFF
position to prevent accidental starting.
•
Always wear eye protection when you make adjustments or repairs.
•
Keep all nuts and bolts tight and keep equipment in good condition.
•
Never tamper with safety devices. Check their proper operation regularly.
•
When servicing or repairing the machine, do not tip the machine over or up unless
specifically instructed to do so in this manual. Service and repair procedures can be done
with the machine in an upright position. Some procedures will be easier if the machine is
on a raised platform or working surface.
•
To reduce fire hazard, keep machine free of grass, leaves or other debris build-up. Clean
up oil or fuel spillage. Allow machine to cool before storing.
•
Stop and inspect the equipment if you strike an object. Repair, if necessary, before
restarting.
•
Clean and replace safety and instruction decals as necessary.
•
To guard against engine over-heating, always have engine air filter mounted and clean.
•
Inspect machine before storage. When not in use, rotate the ON/OFF switch located on
the engine to the OFF position and store indoors in a dry place locked or otherwise
inaccessible to children.
•
Use only original equipment parts from the factory, including all nuts and bolts.
2.4 Safety Decals
This Tiller has been designed and manufactured to provide you the safety and reliability you
would expect from an industry leader in outdoor power equipment manufacturing.
Reading this manual and the safety instructions it contains will provide you with the necessary
basic knowledge to operate this equipment safely and effectively. We have placed safety decals
on the tiller to remind you of some of this important information while you are operating the unit.
These important safety decals are illustrated below and are shown here to help familiarize you
with the content of the safety messages you will see as you perform normal tilling operations.
Please review these decals now, and if you have any questions regarding its meaning or how to
comply with these instructions, reread the complete safety instruction text in this manual, or
contact your local dealer.