Maxim M190G, Техническое руководство

Страница: 27 / 69

Handling, Maintenance, and Repair 2-7
Figure 2-10 Tightening Ink Ribbon
4) Place the ribbon cassette on the frame as shown in Fig. 2.11; then press the knob and section A
simultaneously.
Figure 2-11 Installing the Ribbon Cassette
5) After setting the cassette, turn the knob in the same manner as in step 2) above to tighten the
ink ribbon; then check that the ink ribbon is not bent or loose.
2.1.4 Cleaning paper jams
If a paper jam is occurred, proceed as follows:
1. Cut the paper on the paper insertion side.
2. Remove the ribbon cassette.
3. Pull out the paper from the paper delivery side with a tool, such as tweezers.
4. If there still remain unremovable pieces of paper inside of the printer, remove them as
follows:
PUSH
EJECT
Ink ribbon
PUSH
EJECT
Knob
Section A
Model M190G Technical Manual
3) Before installing the ribbon cassette in the printer, rotate the knob in the direction of the
arrow in Fig. 2.10 to tighten the ink ribbon.