Maxim Integrated
│
9
www.maximintegrated.com
USB2PMB1# Adapter Board
Evaluates: Munich (USB2PMB1#)
Santa Fe GUI Tab
This environment is similar to the Campbell tab described.
It consists of the internal block diagram of the Santa Fe
board and the following operations to perform:
●
Selecting Channel/Range
●
Sample Once and Sample Continuously
●
Average
●
Choose Sampling Rate and Sample Count
●
View Plots
●
Calibrate
●
Plot Configurations Options
1)
Selecting Channel/Range:
Refers to the block
diagram present at the right side of the GUI, which
describes four different channel input options.
Checking the right input and right input range at the
GUI translates the input channel and its data range
at the board. Each channel input has seven differ-
ent input range options for selection. See
Figure 12
.
2)
Sampling
a)
Sample Once:
This pushbutton tab allows dis-
crete sampling.
b)
Sample Continuously:
This feature allows
continuous sampling. Once the Sample
Continuously button is clicked the button
changes its text to
Stop Sampling
and the
user would not be able to disconnect the board
from the software until the user clicks the
Stop
Sampling
button.
c)
Sample Rate:
This drop-down box option
allows the user to choose the sample rate or
the number of samples per second.
d)
Sample Count:
This drop-down box option
allows the user to choose the number of sam-
ples to be sampled.
3)
Real Time Scope:
The scope present on the left side
of the GUI represents the measured data with number
of samples in X-axis and Y-axis is selected from the
available plot view options from the bottom of the GUI
environment.
Figure 12. Munich/Santa Fe GUI