Maxim Integrated
│
12
www.maximintegrated.com
USB2PMB1# Adapter Board
Evaluates: Munich (USB2PMB1#)
Fresno GUI Tab
This environment consists of the internal block diagram of
the Fresno board and the following operations to perform
(
Figure 14
):
●
Sample Once/Sample Continuously
●
Average
●
Sample Rate and Sample Count
●
View Plots
●
Calibrate
●
Plot Configuration Options
1) Sampling
a)
Sample Once:
This pushbutton tab allows dis-
crete sampling.
b)
Sample Continuously:
This feature allows
continuous sampling. Once the
Sample
Continuously
button is clicked the button
changes its text to
Stop Sampling
and the
user would not be able to disconnect the board
from the software until the user clicks the
Stop
Sampling
button.
c)
Sample Rate:
This drop-down box option
allows the user to choose the sample rate or
the number of samples per second.
d)
Sample Count:
This drop-down box option
allows the user to choose the number of sam-
ples to be sampled.
e)
Average:
Drop-down box menu to choose to
average of the discrete values sampled. For
instance, if
16
is selected, it takes the first 16
samples of the sample-shot the user takes,
then averages them and shows the number
in the text box below. If history is selected as
well, it adds this number as a datapoint to the
history. If
all
is selected, it uses all the samples
taken, as selected in
No. of Samples
, to build
the average.
2)
Real Time Scope:
The scope present on the left
side of the GUI represents the measured data with
number of samples in X-axis and Y-axis is selected
from the available plot view options from the bot-
tom of the GUI environment.
Figure 14. Munich/Fresno GUI