MAX32560 EMV DTE User’s Manual
PCD_DTE_MAX32560_V3. 09/01/2017
CONFIDENTIAL
￨
Maxim Integrated | 22
Analog Settings Menu
This menu support trimming of various analog parameters detailed in Table 4. Refer to the MAX32560
AFE Tuning Guide for an in-depth discussion of these parameters, and how to tune them.
Selection
Key
Function Name
Description
A
Type A Trigger Level
RX threshold for Type A signaling (0
–
127)
B
Type B Trigger Level
RX threshold for Type B signaling (0
–
127)
C
Drive Strength
TX carrier amplitude and power delivery (0
–
31)
D
Drive Low Type B Mod
TX Type B modulated amplitude (0
–
31)
E
Exit to Previous Menu
G
Analog Gain
RX gain setting (0
–
12)
H
FD Thresholds
Field Detection Threshold Boundaries
I
FD Type B Mod Red
Field Detections Modulation Reductions for Each Boundary
Table 4: Analog Settings Menu Functions
Logging Settings Menu
This menu allows changes to the L1 stack logging. The default setting “Logging”
, shows CAPDU and
RAPDU messages. This is the required logging for EMV certification session. However, the stack
supports several additional levels of error, and debug information. Each level outputs progressively
more information than the previous. Note: at higher levels, some EMV tests fail due to printing latency.
For normal operation level 1 or 0 should be used.
Содержание MAX32560 EMV DTE
Страница 1: ...MAX32560 EMV DTE User s Manual...
