Maxi-Cosi Quinny, Инструкция по эксплуатации и гарантия

Страница: 21 / 41

GB
Fitting the Maxi-Cosi car seat
- Unfold the pushchair and place the car safety seat onto the adapters with the foot end between the sides of
the handle (17).
- Check to make sure the car seat is fastened securely.
Removing the Maxi-Cosi car seat
- Place your thumbs on the control buttons on both sides of the car seat (18.1).
- Push in the buttons while lifting the car seat from the Fashion 4 XL (18.2).
Removing adapters
- Remove the adapters by moving the red button under the adapters outward (19.1) while sliding the adapters
upwards (19.2).
- Place both guards back in the adapter connections.
When used as a pushchair (see illustrations 20 - 33)
Placing the pushchair seat
- The pushchair seat can be attached in a forward-facing (22) or a backward-facing (24) position.
- Slide the hooks on the pushchair seat (20) onto the front or back projections (depending on the direction
desired) on the frame (21).
- Now push the pushchair seat downwards onto the rod in the middle of the frame (22).
- You should hear a clearly audible “click”.
- Check to make sure the pushchair seat is secure by pulling on it.
- Remove the pushchair seat by pressing both red buttons (behind the seat bottom) and pulling the seat
upward (23).
Footrest
- The footrest can be adjusted into 3 positions.
- Press both buttons on the sides of the footrest at the same time and move the footrest to the desired
position (25).
- IMPORTANT: Never let your child sit or stand on the footrest!
Adjusting the back
- The back of the pushchair seat has multi-positional adjustment.
- To lower the back: Pull up the handle on the back of the seat back and push the back downward (26).
- To raise the back: Simply pull the back upward.
Attaching/removing sun canopy
- Push both ends of the sun canopy into the plastic holders on the handlebar (27).
- Check to make sure the sun canopy is fastened securely.
- To remove the sun canopy, push in the spring catches on both ends (28.1) and pull the sun canopy out
of the holders (28.2).
Safety harness
- Apply the brakes on the Fashion 4 XL.
- Make sure the safety harness is loosened before placing your child (carefully!) into the seat.
- Fasten the lap and shoulder belts to the crotch strap (30).
- Adjust the belts to the size of your child by lengthening or shortening the belts using the clasps (31).
- Push the buttons to open the fastener (29).
- There are D rings for securing an additional safety harness. Make sure any safety harness you use meets the
following standard: BS 6684.
- The shoulder belts are height adjustable. To adjust the height, open the cover on the back and move the clasp
in the cover and around the metal strip (33).
20