78
Aircraft Information
9
Attach 2nd Harness
Strap Loops to
Splitter Plate
•
The sewn ends of the
harness strap loops
must face
towards
you.
• Do not
twist the
harness strap or the
harness adjustment
strap.
•
Make sure the
same
harness strap loops
are fitted completely
on both sides of the
splitter plate.
Install the car seat in a window seat to avoid blocking
the aisle. If the aircraft lap belt is too short, ask the flight
attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating that this car
seat is certified for aircraft use.
This restraint is certified for aircraft use.
Rear-Facing Aircraft
Installation without Base
Follow pages 60-63.
You can only install this child
restraint in the aircraft without
the base.
There is an airplane certification
label located on the back of the car
seat as shown.
The harness system must be installed
correctly. Do not use a child restraint with
damaged harness straps.
sewn
end
Check your child’s fit often. If you cannot achieve a
snug harness fit for your child,
see pages 22-26.
To learn how to check harness tightness,
see pages
12-15.
Check the harness straps often for any wear or
damage.
77
