50
Extend Load Leg
(On Select Models)
•
Squeeze the buttons
on the load leg and
pull it down until it
meets the vehicle
floor.
•
Release the buttons.
7
•
Lift the front of the base while
holding the load leg in place as
shown to lock it into position.
•
It
must be
perpendicular to the
vehicle floor.
Do not
use the load leg if it
does not reach the fl oor of your
vehicle.
Do not
use the load leg
on top of vehicle storage
compartments.
Review your vehicle owner’s
manual.
49
LATCH: Lower Anchor
Belt with Base Install
Finished!
To install the car seat to the
base,
see page 57.
Check the tightness of the install often
to make sure it has not loosened.
• Pushing down on the
base more;
OR
• Reinstalling the base;
OR
• Changing to a different
seating location;
OR
• Switching to vehicle belt
installation
You can also check the tightness by:
If it moves more than 1 in. (2.5 cm), you can try:
• Holding the base
ONLY at
the belt path
with your non-
dominant hand.
• Pushing and pulling from side
to side.
• The base should not move
more than
1 in.
(2.5 cm).
