51
continued on next page
52
9
10
12
11
Tighten Belt
Firmly push down and towards
the vehicle seat back while
pulling free end of belt to
tighten.
If it moves more than 1 in. (2.5 cm), you can try:
A.
Pulling the belt tighter.
B.
Reinstalling the base.
C.
Changing to a different seating location.
D.
Switching to vehicle belt installation.
Check Belt Tightness
Hold the base at the belt path
with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
Extend the Load Leg
Squeeze the buttons on the
load leg and pull it down until it
meets the fl oor of the vehicle.
Release the buttons.
Lift the front of the base while
holding the load leg in place as
shown to lock it into position.
Make sure the load leg is
securely locked into position.
If Using the Load Leg:
Rotate It Completely
Forward
If you are not using the load
leg, skip to step 13.
