8
To Use
13
13a
13d
13f
13
Remove Seat
NOTE: You may want to remove seat for ease
of using car seat in stroller frame.
1.
Remove canopy (see step 5).
2.
Fully recline seat. Detach top of seat by
unbuttoning seat at the top on each side
(Figure 13).
3.
Detach center seat fasteners by pulling up
on fabric above both seat fasteners (Figure
13).
4.
Detach recline straps by sliding D-rings
diagonally through metal rings on each side
(Figure 13a). NOTE: Take note how recline
straps are positioned for reattaching seat
(Figure 13c).
5.
Unsnap bottoms of seat on both sides
(Figure 13d).
6.
Pull seat-back forward.
Lift leg rest and
pull lower seat off frame (Figure 13e).
7.
Press tabs at rear of seat frame to release
seat posts (Figure 13f). Lift seat and
backrest support off stroller frame.
13e
13c
13b
Anchors
