©
2008 Maxford USA www.maxfordusa.com
9
9
5. Put the wheel piece into the fiberglass wheel pant, make sure the black spring face
to the tail. Slide the stick into the aluminum wheel support, tie up the screw on it to
hold the stick. Put the wheel pant down to the wing bottom, use 2 screws to hold the
wheel pant.
6. Attach the wing to the fuselage with 2 nylon bolts in the accessories bag.
7. Install wing 2 pieces of scale wing struts on each side.
8. Install Canopy. Put the black rubber piece to the edge of the canopy, use a few
drops of CA to hold it. Attach 3 small screws to hold the canopy on to the
fuselage.
Motor and Cowling
Install motor to the firewall, then attach the fiberglass cowl to the fuselage. You should
leave a gap between the edge of the cowl and the fuselage. That is the design for better
cooling. Do not push the cowl down to the end.
