©
2008 Maxford USA www.maxfordusa.com
5
5
Other items you need to assemble this model
4 pieces HS-SG90 mini servos or equivalent
10” servo extensions and 6” Y cable
Servo Extension Safety Clip 4 pieces
Electric outrunner motor and ESC
10x5 Propeller
3 cell 2100 mAh Li-Po battery
Li-Po Battery Charger
Receiver and Transmitter
Special Features
Scale ARF for beginner and mid level RC pilots
Fiberglass cowl with scale radial engine cylinders
Unique design suspension landing gear
Spring loaded tail wheel
Improvements on V2
This manual is for 40” EP Gee Bee Y version 2. There are some improvements on this
version. The major improvement is the re-designed battery hatch. On V2 Gee Bee, you
may use 2100 mAh or even bigger size Li-Po battery without any modification on the
battery box. The motor mount on V1.0 and V1.1 was removed. The motor will be
installed on firewall. These improvements make this plane become a 99% pre-
assembled ARF.
*V2 wing is different with V1.0 and 1.10 and can not be used on previous version planes.
EP Gee Bee V1.0 and 1.1
EP Gee Bee V2.0
Motor Mount
V1.0 need to be installed in right
angel. There is only one way to install
it on V1.1. There is no way that people
can install V1.1 box wrong.
There is no separate motor mount.
Motor will be installed on firewall.
