・
As the level gets higher, more heat is felt. However, it is not abnormal.
・
Smoke and odour may occur due to burning of hair during use.
・
Do not continuously irradiate at the same area.
・
This product has a cooling function as being used, however, if you are concerned about the heat of your skin or burning
sensation or redness, cool the skin down with a towel soaked with cold water, etc.
・
If you experience severe pain, stop using immediately.
Caution
Press and hold the power button (for 2 seconds)
to turn off the power.
Unplug the power plug from the power outlet.
When the skin detection sensor detects the skin, irradiation
will start immediately.
Slide the main unit at the same speed.
Be careful not to overlap the irradiated area.
The irradiation interval is about 1 to 3 seconds. It depends on
the output level.
Continuous Mode
Move the irradiation
position
※
When the power is turned off, the temperature inside the main
body is transmitted to the cooling plate, which may cause the
cooling plate to become warm.
Allow time for it to cool down before cleaning.
Caution
Make sure there is no gap between the irradiation window and the
area you want to irradiate.
Press against the area you want to
use
❶
If the skin detection sensor is not in contact with the skin, the
device cannot irradiate.
Irradiate automatically
❷
Repeat irradiation
Cool-down Function
❸
Finish
Long Press
・
If an irradiation error occurs, "E30" is displayed and the operation will stop for 30 seconds.
・
If there is no operation for 3 minutes with the power on, the power will turn off automatically.
・
Do not leave it plugged in after use.
・
Depending on the ambient temperature, the cooling plate may not cool sufficiently and may not feel cold.
When the temperature inside the main unit rises, it stops operating and cools down for
20 seconds.
※
the timing to cool down depends on the output level and the surrounding environment.
Press without
gaps.
12
Содержание MXIP-100
Страница 1: ......
