Maxell MXIP-100, Руководство пользователя

Страница: 12 / 15

It irradiates when the multi button
is pressed.
Move the irradiation position and repeat steps to
The irradiation interval is approx. 1 to 3 seconds. It depends on the
output level.
Single Mode
Single Mode
Make sure there is no gap between the irradiation window and the
area you want to irradiate.
The display flashes while the skin detection sensor is in contact
with the skin.
*If the skin detection sensor is not in
contact with the skin, the device
cannot irradiate.
Flashing
Ready for
irradiation!
Press without gaps
Move the irradiation
position
Press against the area you
want to use.
For each mode, see the mode description below to use .
When you want to perform a treatment for a
small area or sensitive area
When you want to efficiently care for a wide
area
*Continuous mode is a mode of continuously
irradiated with preset output level.
*The level cannot be changed in continuous
mode.
❶
Ready for
irradiation
❷
Irradiation
❸
Repeat irradiation
❹
Irradiation is ready when the entire display flashes.
❶ ❸
Continuous
irradiation mode
Long Press
Press
The mode can be switched by long pressing the
multi button (for 2 seconds).
Select the mode to use.
11
Switch the
mode