3
Remote Control
Conductive part (antibacterial spec)
LED
Poewr OFF
Button
Mode Button
Battery
lid
Charging
Terminal
Insulation
Sheet
4
6
❷
Charging (Charge before use )
❶
Remove insulation sheet
Pull out the insulation sheet of the
remote control.
・
Connect the device and the
power adapter with the cable.
※
Be careful
of the
insertion
direction.
Remote Control
Controller
・
When the power adapter is
plugged into a power outlet,
the LED will light up and charging
will begin.
・
When charging is complete,
the power button will stop
flashing and remain lit.
Remove the power adapter
and charging cable.
5
．
This remote control has been certified as a specified low power device based on the Radio Law. Therefore,
no license is required to use it. However, it is prohibited to disassemble or modify the product or remove the
certification label.
6
．
Do not use in places where use of mobile phones or wireless devices is prohibited such as in hospitals or
priority seats in trains.
Name of each parts
Usage
Main Unit
Controller
Power Button
Intensity
Selection Button
Intensity
Selection Button
Snap (Stud)
Snap
(Stocket)
210-143756
