
When not in use for a long period of time, charge the controller and remove the battery from the
remote control for storage.
Make sure that the power is not turned on, and store it away from high temperatures, high humidity,
direct sunlight and dusty places.
Please charge the battery once every 3 months. Otherwise the battery may deteriorate and cannot be
used.
Storage Method
After use, wipe off sweat and moisture, remove the controller from the main unit. Fold the main unit,
and store it in the storage pouch with controller, remote control, charging cable and
power adapter. If you leave the product without wiping off sweat and moisture, the product life may be
shortened.
If you feel pain during eletrical stimulation
Do not use the product in the following ways.
The left and right non-woven fabrics
are in contact
Using with one piece of
non-woven fabric
Using non-woven fabrics in
layers. Using dry non-woven
fabric
10
※
The controller and the main unit are not waterproof. Please do not allow the
controller or the main unit to get wet.
※
Please do not use wet tissues with chemicals (for face cleansing, makeup
removing, etc).
※
When you placing the non-woven fabric, please do not let it touch the
controller or the snaps.
•
•
Even after changing position of your feet or the sitting position or using a non-woven fabric, you still feel strong
electrical stimulation, stop using this product immediately.
•
•
•
•
Wet 2 pieces of non-woven fabric or thin cloths with water, wring them well,
place a piece on each conductive part of both sides of the main unit.
• If you feel pain or numbness during use, switch off the device, change the position of your feet or sitting
position, and then try again.
• Do not forcibly increase the intensity.
• In the beginning, please start the training from low intensity level (level 1, etc.), and gradually increase
the intensity after getting used to electrical stimulation.
• Traning steps will be switched automatically and does not support manual operation.
• When the device is stopped during the training, next training will start from the beginning.
• Use within 10-35°C.
• If the power button does not light on or the electrical stimulus cannot be felt, the battery may be
exhausted. Please charge the controller.
• Be sure to disconnect the charging cable before use.
Caution