Charging Method
０→100%
approx. 13hrs
approx. 7hrs
When using an AC adapter with 5V1A USB-A output
When using an AC adapter with 5V2A USB-A output
It can be charged faster by using a commercially available USB Type-C output
AC adapter and Type-C cable.
Caution
Caution
Charging Method
approx. 4hrs
０→100%
When using an AC adapter compatible with Type-C PD
(18W or more)
※
1.
Total up to 65W max.
※
3. Total value of internal battery. Standard capacity is 12720 mAh.
7
Device
W
109×
D150×H26mm
(excluding protrusions)
approx.
70cm
Plug shape
USB-A –USB Type-C (56kΩ built-in resistance)
Rated input
Rated input
Rated output
※
1
Type-C port DC15V/1.2A, 12V/1.5A, 9V/2A,
5V/3A, 5V/2A(PD2.0
Corresponding max.
18W)
USB-A port DC5V/2.4A
（
2port total Max. 2.4A
）
Type-C port DC15V/2A, 12V/2.5A, 9V/3A,
5V/3A(PD2.0
Corresponding max.
30W)
AC OUT
AC100V/Max. 65W
※
2
50Hz
（
pseudo sine wave
）
approx. 530
g
0
～
35
℃
Lithium ion battery Rated voltage3.6V
/
Rated capacity12000mAh
※
3
（
43.2Wh
）
・
(Recommended: USB Type-C output AC adapter MACA-TYC02 manufactured by
our company)
PD: Abbreviation for POWER DELIVERY. USB power extension standard
that enables supply and demand transmission up to 100W using a USB
cable.
Charge this product
(After purchase, please charge before use.)
・
Connect a commercially available AC adapter with
USB-A output and the charging cable that is
supplied with this product, and plug the Type-C
plug into the In/Out terminal (IN/OUT3) of the main
unit and plug the AC adapter into a household
outlet. While charging, the remaining capacity
indicator LED lights up and flashes according to the
battery capacity.
・
When the battery is fully charged, the remaining
amount LED indicators will all be lit so please
disconnect the dedicated power adapter.
- Supply power to the device using the USB-A port (OUT1/OUT2)
(Example: charging a smartphone)
If the device uses a Type-C input, connect it to the device using the charging cable
that is supplied with this product and press the power button. If the device uses a
Micro-B input, connect to the device using the charging cable supplied with the
target device or a commercially available USB-A Micro-B cable. Also, when
connecting a USB-A-Lightning cable, OUT1 port can be used for fast charging up to
2.4A.
To stop the power supply, press the power button to turn off the output, and then
unplug the connected cable. In addition, when no load condition (less than 5W of
AC output, less than 100mA of USB output) is detected the power is automatically
turned off in about 60 seconds.
-Supply power to the device using the Type-C port (Example: charging a
smartphone) The Type-C port will automatically start supplying power when the
device is connected. Connect the device using a commercially available Type-C
cable. To stop the power supply, disconnect the connected cable. If the Type-C
port of the connected device is for both input and output (DRP mode), the
product may be charged. In that case, disconnect the cable and reconnect.
When the power button is pressed, the indicator LED and the remaining amount
indicator LED will light as soon as the output starts. Press the power button again
to stop the output and LED lights will be turned off.
●
While charging this product, AC OUT and USB-A (OUT1/OUT2) can not be
used. Furthermore, AC OUT cannot be used while using Type-C (OUT3) output.
●
The maximum total output of all connected devices at one time (USB port,
total of AC OUT) is 65 W. The maximum rating of each output terminal is: USB
port: DC 5 V / maximum 2.4 A (maximum 12 W), AC OUT: AC 100 V / 65 W
Type-C port: DC15V2A (max. 30W). When the supply current to the connected
equipment exceeds the rating, circuit protection may operate which will cut
the power supply.
●
When the USB-A port is less than 0.1 A supply and AC OUT is 5W or less, the
automatic stop function operates and the power stops.
●
When the battery's remaining capacity of this product is low, the output
current may be limited.
●
In the unlikely event that data is lost whlist equipment is connected to this
product, we will not take responsibility for lost data whilst using this product.
●
The charging time varies depending on the type of AC adapter used.
●
If charging can not
be completed even after the elapse of the specified time, please discontinue charging.
●
Even if you do not use this product for a long period of time, please charge at least once
every 6 months. Charging may not be possible if it is fully discharged.
AC OUT and USB-A port, press the power button to start / Stop power feeding.
Power up the unit
- Using AC OUT (eg, powering a laptop PC)
Insert the dedicated AC plug of the AC adapter included with the laptop PC into
the output terminal AC OUT of this product, press the Power button.
Some equipment did not support with pseudo sine wave
Depending on the equipment you use, so please check before use.
Checking battery level
[Caution on AC OUT ]
●
Please check beforehand that the equipment to be connected operates
normally before using.
●
In some equipment the power consumption at startup may exceed the displayed
power consumption. The product can not be used when the power consumption
exceeds 65W at any time.
●
Compared to household AC power supply (AC 100 V), the capability of the
equipment may be reduced.
●
Noises may occur on radio or audio players connected to this product.
●
If the battery level of this product is low (less than about 10%) it may not start
supplying power when the power button is presses. Please use it after charging.
[Caution on USB Port ]
●
If the device communicates with the PC using data signal cable, power may not
be supplied.
●
When the battery level of the equipment is 0, it may take time until the
equipment can be operated., or it may not able to charge.
Maintenance
Please remove any dirt on the device with a neutral detergent or cloth containing
water, and wipe it off with a soft, dry cloth. Do not use benzine, thinner, alcohol,
etc.
Dimensions
Operating
Temperature
Built-in Battery
Cable length
Cable
Specification
※
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
Approx. charging time
4
Operating Instructions
5
6
The AC adapter output current
is insufficient and the
protection circuit is operated
Use an AC adapter that exceeds
the rated input current of this
product
The power consumption of the
device used is small and the auto
power off function is operated
Power supply automatically
stops in about 60 seconds when
it is less than 5W
The AC adapter is not
connected properly
Ensure proper connection
Ensure proper connection
Troubleshooting (When problems arise)
Use it after a while
Low battery
Charge
Overcurrent circuit protection
is activated
Check the operating current
(power consumption) of the
equipment. Charge it.
Output stop
or,
Repeat ON/OFF
Equipment could
not be charged.
(AC OUT)
Output stop
or,
Repeat ON/OFF
Equipment could
not be charged.
(AC OUT)
Equipment is not connected
properly
Connecting devices that
require a stable accurate
waveform and frequency
It can not be used.
Please check the equipment
used. (This product has an output
of AC100 V 50HZ pseudo sine
wave)
Load fluctuation of equipment
to be used/charged is large
The product can not be used
when the device's input power
exceed the displayed power
consumption 65W
Instantaneously
LED lights up and
does not flash
when charging this
product. Or, the
charging time is
longer than the
predetermined
time
The body of the
device is warm
LED does not light
up when the power
button is pushed
Temperature of charging
location exceeds working
temperature range
The battery is stored for a long
time while the remaining charge
in the battery is 0
Ensure that the temperature
of the location where product is
being charged is within the
operating temperature range
Please charge once every 6
months not to discharge
completely
It is not abnormal for the body
of the main unit while charging
/ discharging and immediately
Use it after a while after charging/
discharging to become warm
The power consumption of the
device used is small and the auto
power off function is operated
The USB-A, Type-C port
automatically shuts off in about
60 seconds when the load
current is less than 100 mA
Short discharge
time
Ensure proper connection
Equipment is not connected
properly
Equipment with the maximum
rating or more is being used or
charged
Low battery level
Charge
Battery has reached the end
of its life
If the discharge time becomes
extremely short even when it is
fully charged, then the battery
has reached the end of its life
Equipment with the maximum
rating or more is being used or
charged, the protection circuit is
operated
Confirm current usage (power
consumption) of equipment
Confirm current usage (power
consumption) of equipment
(USB-A,
USB Type-C）
The device can
not be charged
