MAXDATA PLATINUM 520, Системное руководство

Страница: 15 / 31

14 15 MAXDATA PLATINUM 520 Server Server Board Installations and upgrades 14 15 MAXDATA PLATINUM 520 Server Server Board Installations and upgrades
3 Server Board Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the installation precautions at the
end of this manual.
Tools and Supplies Needed
• Phillips (cross head) screwdriver (#1 bit and #2 bit)
• Needle nosed pliers
• Antistatic wrist strap and conductive foam pad
Installing and Removing Memory
The silkscreen on the board for the DIMMs displays DIMM1B, DIMM1A, DIMM2B, and DIMM2A,
starting from the inside of the board. DIMM2A is the socket closest to the processor socket.
Installing DIMMs
To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions at the end of this manual. See “Installation
Precautions”.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3 . Disconnect the AC power cord.
4. Remove the server’s cover. See your chassis documentation for instructions.
5. Locate the DIMM sockets. See Figure 5.
TP00684
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
Figure 5. Installing Memory