MAXCUT STEALTH-12 OPERATOR’S MANUAL
MAXCUT INC.
Page 5 of 31
MADE IN U.S.A.
1.4.5. The chainsaw cover provides protection against contact with moving parts,
ejected debris, broken chain, thrown water, and concrete slurry. Never run
the saw without the cover in place.
1.4.6. Never allow anyone to stand in front of, or in line with the chain forward of the
guard.
1.4.7. Always use safety footwear, a snug fitting wet suit, safety goggles or face
shields, and hearing and head protection devices. Safety shoes MUST
provide good footing to prevent slipping or falling down. Gloves protect the
hands from debris and should be worn.
1.4.8. DO NOT use the saw when you are tired or fatigued.
1.4.9. Never operate the saw under the influence of drugs, alcohol, or medication.
1.4.10. Always carry the saw in its de-energized state.
1.4.11. Keep the saw handles dry, clean, and free of oil.
1.4.12. DO NOT start cutting without first de-energizing electrical wiring near the
cutting site or imbedded in the concrete.
1.4.13. Before cutting through a wall, check both sides for possible obstructions.
1.4.14. Prior to cutting, plan your cuts to prevent pinching of the bar or injury from
falling concrete.
1.4.15. Always hold the saw with both hands during operation. Use a firm grip on the
handles.
1.4.16. Never exceed the flow and pressure rating of the saw, 12 GPM at 2500 psi.
1.4.17. DO NOT attempt to adjust the saw during operation.
1.4.18. Keep clothing and all parts of the body away from moving parts of the saw
when connected to a power source or being used.
1.4.19. The slurry formed during cutting operations is very slick. Remove while still
wet to prevent yourself or others from slipping while cutting. Slurry that has
been allowed to dry is very difficult to remove.
1.4.20. Always shut off the hydraulic power and cooling water sources before
disconnecting the hoses or servicing the saw.
1.4.21. Always shut off the hydraulic and cooling water sources when not using the
equipment.
