Page 5 of 10
Receiver Controls, Indicators, and Alarms
This section of the manual will give an overview of the available menus in the
MX862R-2 series optic receiver and their descriptions. All instructions in Section
2.0 refer to the representation of the front panel shown in the diagram below. The
user scrolls through the menus using the push bottoms found on the front panel,
these are located just to the right of the LCD screen.
3.1
The operation of the panel
3.1.1
Open menu
A.
Plug in 110V power supply
B.
Turn on power switch in the rear panel
Unit enters the self-check mode, after validating, it enters working status,
and will display “
Forward optic receiver
”.
RX1
Status lamp Red
RX2
Status lamp Red
TEMP
Status lamp Green
POWER1
Status lamp Green
AGC Status lamp Green
If the equipment operates with dual power supply, status indicator
of “POWER2” is in green.
If the status is changed from “AGC” to “MGC”, its status indicator
turns to green.
3.1.2
Start-up main menu
Press “STATUS” button will display below menu in sequence.
Menu # 1 -
S/N
Read-only menu, indicates the serial-number
Menu # 2 -
INPUT
Read-only menu, indicates the input optical power
