Page 3 of 10
1.0
PRODUCT SUMMARY
The MX862R-2 CATV Fiber Optic receivers are designed high reliability with
optical AGC, high level RF output, ease of use, easy to read LED indicators,
and suitable for high-level applications.
2.0
INSTALLATION
2.1
Unpacking
Inspect the shipping boxes for any obvious damages.
Unpack the unit from all packaging boxes.
Inspect the appearance of the unit for any shipping damages.
Document and inform the shipping company and your local representative,
as seen in section 1.2, of the damages.
Save the shipping boxes and their inserts for any future reshipment for
upgrade or repair.
2.2
Receiver Mounting and Power Connection
Place the unit into a 19-inch wide rack or cabinet. Make sure to leave a
1.75-inch (about 4.5cm) space above and below the unit.
Climate 0°C~50°C
（
32°F~122°F
）
temperature range. We
recommend 25°C
（
77°F
）
environment temperatures.
Humidity not higher than 95% in a dust free environment.
Equipment powered by AC or optional DC voltage.
Request of power supply:
AC input
94-245VAC, 50-60Hz
DC input
36-60VDC, floating
Power consumption
Maximum 50W
The DC power supply of the equipment must be the SELV supply
stipulated as CAN/CSA C22.2 No.950-95 standard.
The unit should be grounded, grounding resistance
＜
4Ω. According to
international standards.
Before connecting circuit, please use spec (#20AWG and larger) electrical
wire to connect the grounding screw on the bottom and the grounding frame.
When use DC input power supply, the equipment chassis must be grounded.
2.3
RF connection
Connect the RF cable & the connector on RX rear panel. RF connector is F
type plug. The resistance is 75Ω.
