Page 4 of 12
3.0
EDFA CONTROLS, INDICATORS, AND ALARMS
This section of the manual will give an overview of the available menus in the
MX-A5400 series EDFA and their descriptions. All instructions in Section 3.0 refer
to the representation of the front panel shown in the diagram below. The user can
scroll through the EDFA menus by using the push buttons that are on the front
panel and are located in the right of the LCD screen.
*Note, some models may have different configurations and button displays
MX-A5400A:
3.1Operation of the panel
3.1.1 Open menu
A. Plug in power supply
B. Turn on power switch located on the back panel (for AC powered
units),
Front panel display "KEY OFF"
Laser
Status lamp
Red
C. Input power, then press laser start-up key switch
Front panel shows "
KEY ON…"
，
PUMP- Status lamp Red
INPUT- Status lamp Red
ALARM - Status lamp Red
POWER1 - Status lamp Green (no light when power is off)
POWER2 - Status lamp Green (no light when power is off)
3.1.2
Start-up main menu
Press
\
button, the following menu items will be displayed in sequence.
1
Model
Read-only menu, indicates the type of equipment
output
OUTPUT
