Note: You cannot de-register the handset that you are currently using.
1. Press <MENU> and <UP/DOWN> to select
BS SETTINGS
.
2. Press <OK> and <UP/DOWN> to select
DEL HS
.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> and a list of registered handsets is displayed.
6. Press <UP/DOWN> to select one of the handsets that you want to de-register.
7. Press <OK> to confirm.
7.4.4
Change the dial mode
1. Press <MENU> and <UP/DOWN> to select
BS SET
.
2. Press <OK> and <UP/DOWN> to select
DIALMODE
.
3. Press <OK> and <UP/DOWN> to select
TONE
or
PULSE
.
4. Press <OK> to confirm.
7.4.5
Change the Flash Time
The flash time setting is country dependent. Please contact your local service provider for the correct settings.
1. Press <MENU> and <UP/DOWN> to select
BS SET
.
2. Press <OK> and <UP/DOWN> to select
FLASH
.
3. Press <OK> and <UP/DOWN> to select your desired flash time (
SHORT, MEDIUM, LONG
).
4. Press <OK> to confirm.
7.4.6
Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your
phone against unauthorized use. The default system PIN code is 0000.
1. Press <MENU> and <UP/DOWN> to select
BS SET
.
2. Press <OK> and <UP/DOWN> to select
CHG PIN
.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.
5. Press <OK> and enter the new system PIN.
6. Press <OK> and enter the new system PIN again.
Note: If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is
requested to enter the valid system PIN again in Step 5.
6. Press <OK> to confirm.
7.5
Registration
Your handset and base station is pre-registered. Up to five handsets can be registered to a single base station.
If for some reason, the handset is not registered to the base station (<Antenna icon> flashes even when the
handset is near the base station), register your handset according to the following procedure.
1. Press and hold <PAGE> on the base station for about five seconds, the base station is entered into registration
mode.
2. Press <MENU> and <UP/DOWN> to select
REGISTER
.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> to confirm.
If the handset registration is successful, you will hear a confirmation tone and the <antenna icon> will stop flashing.
The handset will automatically be allocated the next available handset number. This handset number is shown in
the handset display in standby mode. If the handset registration is unsuccessful, the <antenna icon> will still flash.
7.6
Reset Your Phone
You can reset your phone to the default settings. After reset, all you personal settings and call log entries will be
deleted, but your phonebook remains unchanged.
1. Press <MENU> and <UP/DOWN> to select
DEFAULT
.
2. Press <OK> and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press <OK> to confirm.
5. Press <OK> to re-confirm.
