1-2
INTRODUCTION
www.maxcessintl.com
LC500G Load Cell
MI 850A296 1E
About these operating
instructions
All of the information herein is the exclusive proprietary property
of Maxcess International, and is disclosed with the understanding
that it will be retained in confidence and will neither be duplicated
nor copied in whole or in part nor be used for any purpose other
than for that disclosed.
Copyright 2011, 2019 all rights reserved.
Periodically there will be updates to this manual. The latest version
is available on our website or by calling your regional office listed
on the back page of this publication.
These load cell devices must not be installed or used in a machine
or system that does not comply with the machinery directive
2006/42/EC.
These load cell devices were designed and manufactured to be
installed as Partly Completed Machinery into a machine or partly
completed machine.
The instructions must be read and used by all persons who have
the responsibility of installing and maintaining these load cell
devices.
These instructions must be retained and incorporated in the
technical documentation for the machine or partly completed
machinery into which the load cell device was installed.
CE marking
Only the 2006/42/EC Machinery directive applies to these devices
and they are not marked with the CE sign.
Electromagnetic Compatibility (EMC)
The load cell device is inherently benign in terms of
electromagnetic compatibility and the EMC directive has not been
applied. The electromagnetic compatibility of the load cell device
can only be assessed in connection with the entire electrical
installation including the control. The machine builder who installs
this partly completed machinery into a machine is responsible for
compliance with the EMC directive.
Language
These are the original instructions, written in English.
